Before you start

Good news: you need almost nothing. One photo and this page. All conversion happens in the browser — no software to install, no account to create. But thinking about two things first will save you a lot of backtracking:

  • How big should the finished piece be? A keychain, or a portrait for the wall? This decides your grid size later.
  • What is the subject? A face, a pet, or a landscape? Each has different demands on photo sharpness.
One guiding principle: cross-stitch is good at clean color blocks and clear outlines, not photographic gradients. Choose your photo and settings with that in mind.

Step 1: Pick a photo that converts well

This is the most overlooked step and the one that most affects the result. The generator squeezes your photo into a grid dozens of cells wide, and each cell can hold only one color. Detail that is already muddy in the photo will only get muddier in the chart.

Photos that work well

  • Clear subject, large in frame. A face or pet should fill 60% or more of the image, with a little margin.
  • Even, front-facing light. Avoid backlighting, half-shadowed faces, or hard shadows over features.
  • Simple background. Solid or blurred backgrounds help the subject stand out.
  • A manageable color count. Photos with 3–15 main colors convert most cleanly.

Photos that need care

Photo issueLikely resultHow to fix it
Busy backgroundBackground splits into dozens of stray colors and competes with the subjectCrop first, or raise “Merge similar colors”
Face too smallFeatures blur into a few cells; the person is unrecognizableCrop tighter so the face fills at least half the frame
Too darkColors collapse into dark browns and blacksRaise brightness by 20–40 after upload
Lots of gradients (e.g. sunset)Visible color banding and hard stepsUse the soft palette or increase the grid size

Once you have a photo, do a quick crop in your phone's gallery: center the subject, choose a square or your preferred frame. Thirty seconds here saves you minutes of tweaking later.

Step 2: Set grid density and finished size

The column count is how many cells wide the chart is. It sets both detail level and finished size — the most important parameter in this guide.

How cells, fabric count and size relate

Cross-stitch fabric is measured in “count” (CT) — cells per inch. 14CT is the most common starter fabric: 14 cells per inch. The formula is simple:

Finished width (inches) ≈ columns ÷ fabric count
For centimetres, multiply the result by 2.54.
ColumnsWidth on 14CTGood forDetail
30~5.5 cmKeychains, pins, bookmarksOutline only
45~8 cmSmall charms, coastersFaces recognizable
60~11 cmOrnaments, small decorGood detail
90~16 cmPortraits, wall artRich detail
120~22 cmLarge wall piecesVery fine detail
How to choose: if unsure, start at 40–60 columns. More cells mean much more stitching — a 90-cell portrait can take dozens of hours. Stitch a small sample first before sizing up.

Step 3: Choose a palette

The palette decides which floss color each cell maps to. Three options are provided:

  • Full DMC: about 70 common colors. Most accurate matching and smoothest transitions — best if you want fidelity and do not mind buying more floss.
  • Basic 17: only the most useful reds, blues, greens, blacks, whites and skin tones. Fewer colors, easier matching, and a flat cute style.
  • Soft tones: pastels, creams and pale blues, ideal for babies, pets and fresh, light designs.

The preview updates as you switch. The same photo looks photoreal with the full palette and more like a cartoon illustration with the basic set — neither is wrong; it depends on the look you want. For each code, see the DMC color chart.

Step 4: Merge close colors for a cleaner chart

Automatic matching often creates one problem: too many colors. One photo can produce 40+ floss colors, many differing only slightly — hard to tell apart, but enough to send you buying a dozen extra skeins.

“Merge similar colors” groups near-identical shades into one code. A setting of 12–20 typically cuts the color count by a third to a half, with almost no visible change to the picture.

  • Maximum fidelity → lower merge (0–8)
  • Fewer floss colors and a more unified piece → higher merge (15–30)
  • Busy background → raise it so the background collapses into a few shades

Watch the thread list at the lower right: it shows every code, its name, cell count and hex value. Colors with zero cells are unused and can be skipped at the shop.

Step 5: Export and print

When you are happy, you have four outputs:

  • PNG chart: a high-resolution image, easy to view on a phone, share, or send to a stitch shop.
  • SVG chart: a vector file that stays sharp at any size — good for large prints or design software.
  • Thread list CSV: every code and count in a spreadsheet, so you can tick them off while shopping.
  • Print: calls your browser's print dialog. Turn on “Show color codes” first.

Practical printing tips

  • Choose “fit to page” or “actual size” and check that grid lines and color blocks stay distinct in the preview.
  • Print in color if you can. If you must print in black and white, turn on “Show color codes” so you match floss by code rather than guessing from greys.
  • For large charts, print across several pages and tape them together, leaving about 1 cm of overlap for alignment.
  • On a phone, pinch to zoom into a region — often easier than a paper chart.

Step 6: From chart to finished piece

The chart is only the beginning. Work in this order:

  1. Buy floss. Use the thread list: each number is a standard DMC code, easy to find online or in store.
  2. Prep fabric. Cut to the size from Step 2 plus 5–8 cm on each side for finishing. 14CT is most common; 16CT or 18CT gives finer detail.
  3. Start at the center. Begin at the middle cell of the chart so your placement stays even.
  4. Stitch large blocks first. Fill the biggest color areas early — quick progress and easier to check the composition.
  5. Finish outlines and details last. Faces, lettering and edges go in at the end.
Beginner tip: your first piece should be a 30–45 cell chart with the basic palette. It can be finished in one or two evenings, so you actually get to the finished object.

Troubleshooting

The colors are not what I expected

Palette matching is approximate, and screens differ from real floss. Try another palette, adjust brightness and contrast, or change the merge value. Always match floss by the DMC code on the chart, not by screen color.

The chart is too dense to read

Lower the column count (say 90 → 60), or export SVG and zoom in. For the on-screen preview, set browser zoom to 100% first.

The exported image looks blurry

The PNG is generated at native grid resolution and is sharp by itself; blur usually comes from your image viewer zooming. Use SVG for lossless scaling.

Too many colors to buy floss for

Raise “Merge similar colors”, or switch to the Basic 17 palette. The thread list updates live so you can watch the color count drop.

Ready to try? Open the pattern generator, upload a photo and use the settings above. If you get stuck, check the FAQ or tell us.